Tamworth Regional Council

Q118-2025

Thursday 13 November 2025 (AUS Eastern Standard Time)

Thursday 11 December 2025 05:00 PM (AUS Eastern Standard Time) CLOSED

Thursday 11 December 2025 05:00 PM (AUS Eastern Daylight Time)

Thursday 08 January 2026 (AUS Eastern Standard Time)

Tamworth Regional Council

472 Peel St
Tamworth, New South Wales 2340
Australia

https://www.tamworth.nsw.gov.au/

Tamworth Regional Council is a local government area in the New England region of New South Wales, Australia. The area under administration is located adjacent to the New England Highway and the Main North railway line. It was established in March 2004 through the amalgamation of the former City of Tamworth with surrounding shires of Barraba, Manilla, Nundle and Parry.

Tim Hurcum

Electrical Engineer

+61267675044

+61418473192

None Provided

t.hurcum@tamworth.nsw.gov.au

This Project involves improving egress and access to Tamworth's Calala Water Treatment Plant SCA2 switch room.

Contractors are required to attend a mandatory pre-tender site inspection meeting, on 27 November 2025.

General works scope include:

DOOR 'D1'

1. Cut into and make secure opening in masonry wall for D1.

2. Supply and install door frames including sealing for D1.

3. Supply and install door frame including specified door hardware to NCC requirement. Door to have internal panic bars, self-closer & lockable from external entry.

4. Supply and install landing footings, platform structure, handrail & stairs.

5. Supply and install weather awning for D1.

DOOR 'D2'

1. Remove existing roller door and metal framing.

2. Supply and install door frame including sealing for framework.

3. Supply and install double doors D2 as shown including specified hardware to NCC requirements. Door to have internal panic bars, self-closer & lockable from external entry.

4. Supply and install landing footings, platform structure, handrail & stairs.

5. Supply and install wall girts for lining and cladding.

6. Supply external colorbond cladding including weather.

7. Supply & install internal cfc lining including jointing, seal/undercoat and 2 topcoats.

LOCALISED CIVIL WORKS

1. Remove organic material in footpath footprint.

2. Proof roll and condition sub-base material to form a compacted, flat and level base.

3. Supply, place & level 50mm sand/crusher dust base course.

4. Supply & place n32 concrete path as shown including all formwork, reinforcement, vapour

Barrier & joints as shown.

5. Supply and install protection barriers.

6. All door framing to be painted as per as5130 acl1 requirements.

This project includes replacing the switch board in Calala WTP SCA2. The SCA2 switch board controls equipment in the Chemical wing of the WTP. Additional some structural work is required to the switch room to brining the room up to current safety and building standards.

The Electrical work is being managed by Tamworth Reginal Council as a separate project. this quotation is for the Structural and Civil work as listed in the General Works Scope above.

Contractors are required to attend a mandatory pre-tender site inspection meeting at Calala Water Treatment Plant, 31-37 Calala Lane, Calala NSW 2340, 10 am, 27 November 2025, to gain an understanding of the work involved and site conditions.

• New South Wales
  1: Northern

All Regions of Service locations are within Australia.

None...

None...